Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mountain View, CA
Chimney repair in Mountain View usually means something different than it does in older cities. The homes here weren’t built with masonry fireplaces – they were built with factory-made metal fireboxes and short, stubby flues from the 1950s and 60s. Those systems fail in predictable ways, and we’ve been diagnosing and fixing them since 2013. If you’re looking at a cracked firebox liner, a missing cap, or a flashing leak on an Eichler in Waverly Park, call (877) 610-3049 and we’ll tell you what’s actually wrong before any work starts.
Why Mountain View Homes Are Different
Most of Mountain View’s housing stock is post-war tract construction, and that changes chimney work at a fundamental level. The original fireplaces in the Eichler and rancher homes of 94040 and 94043 were prefab metal units with short, often exterior, chimney runs. They were never designed for decades of wood burning, and many have since been converted to gas inserts or left completely unused. When we open one up, the issue is rarely heavy creosote. It’s usually corrosion, a lost cap, or a liner that was never rated for what the homeowner wants to burn now.
The climate plays a role too. Mild, dry summers and rare freezes mean chimneys sit dormant for most of the year. That creates a different set of problems: bird nests, raccoon debris, and rust that forms quietly while the system is idle. Add in the occasional winter inversion and nearby wildfire smoke, and a surprising number of Mountain View residents have sealed off their fireplaces entirely or switched to gas inserts. When they do, the old factory-built flue has to be checked before any insert goes in. In the Eichler tracts especially, we regularly find cracked firebox liners and missing caps that would be invisible to the homeowner but are exactly what we look for on every visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mountain View Services
Most Mountain View homeowners call us for one of two reasons: a chimney that hasn’t been looked at in years, or a dryer vent that’s never been cleaned at all. Both are fire-safety issues, and both are handled by the same crew.
Chimney Sweep in Mountain View
A sweep in Mountain View is less about soot and more about assessment. The short, factory-built flues in mid-century homes don’t accumulate heavy creosote the way a masonry chimney in the hills might, but they do collect nests, debris, and evidence of corrosion. We remove what’s there, inspect the full run with a camera, and document what we find. If a gas insert is in your future, the sweep is your chance to confirm the flue is sound before a contractor starts the swap. Chimney Sweep in Mountain View covers what to expect on the day and what we inspect.
Dryer Vent Cleaning in Mountain View
Dryer vents are a fire hazard most homeowners overlook, and in Mountain View’s compact utility closets and attached garages, the vent run is often longer and harder to access than it looks. Lint builds up at the elbows and the exterior termination, and a single season of heavy laundry use can create a real restriction. We clean the full run from the dryer to the outside cap, then run the dryer to verify airflow. Dryer Vent Cleaning in Mountain View explains the process and why the NFPA lists failure to clean as a leading cause of dryer fires.
Chimney Repair in Mountain View
Most chimney repair calls in Mountain View start the same way: a homeowner notices water staining near the fireplace, or a home inspector flags a problem before a sale, or a gas insert installer refuses to touch the old firebox until it’s been lined. The homes here were built with factory-made metal fireboxes and short flues that are now 60 to 70 years old. What we find is rarely a surprise – cracked firebox liners, rusted caps, failed flashing at the roofline – but the fix has to match the original system, not just patch over it. That’s where our experience with Chimney Repair materials and methods makes the difference, and it’s why we keep DuraFlex and HeatShield components on hand for Mountain View jobs.
Chimney Cap Installation
Signs you need it
You can see daylight through the top of your flue from the ground, or you’ve found bird nesting material, twigs, or raccoon debris inside the firebox.
What it costs in Mountain View
Chimney cap installation in Mountain View typically runs $180 to $450 for standard prefab metal flues, with custom stainless caps on the higher end.
How we do it
We measure the flue opening, select a stainless or copper cap sized for the existing termination, secure it to the flue with mechanical fasteners, and verify the draft is unobstructed.
Chimney Cap Replacement
Signs you need it
Your existing cap is rusted through, has missing mesh, or has blown off entirely during a winter storm.
What it costs in Mountain View
Replacement caps run $220 to $480 installed, depending on flue size and whether the mounting bracket needs to be rebuilt.
How we do it
We remove the failed cap, clean the flue termination, install a new cap with a proper spark arrestor mesh, and confirm it’s rated for your fuel type.
Chimney Flashing Repair
Signs you need it
You’re seeing water stains on the ceiling near the chimney or peeling paint around the roofline penetration after rain.
What it costs in Mountain View
Flashing repair in Mountain View typically ranges from $350 to $800 depending on the roof pitch and whether the old flashing can be salvaged.
How we do it
We remove the failed flashing, inspect the underlayment for rot, install new step and counter flashing with proper overlap, and seal the transition with a high-grade exterior sealant.
Chimney Crown Repair
Signs you need it
The concrete or mortar surface at the top of your chimney is cracked, spalled, or showing exposed aggregate.
What it costs in Mountain View
Crown repair runs $400 to $1,000 in Mountain View depending on whether we’re sealing hairline cracks or rebuilding the crown entirely.
How we do it
We clean the existing crown, fill minor cracks with an elastomeric crown sealant, or form and pour a new concrete crown with a proper drip edge when the damage is structural.
What Chimney Repair Costs in Mountain View
Here’s what we’re quoting for most repair work in Mountain View right now. Exact pricing depends on roof access, flue size, and the condition of what’s already there.
| Item | Typical range in Mountain View |
|---|---|
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $220 – $480 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $400 – $1,000 |
How long does chimney repair take in Mountain View?
Most cap replacements and flashing repairs are done in a single visit, usually two to four hours. Crown rebuilds and liner work may require a return trip for materials to cure.
Do I need a permit for chimney repair in Mountain View?
Minor repairs like caps, flashing, and crown sealing don’t require a permit in Mountain View. Relining or structural rebuilds may, and we’ll tell you before any work starts if your job does.
Brands We Service in Mountain View
We stock and install components from DuraFlex, HeatShield, and Olympia Chimney on our Mountain View trucks. That means liner materials, resurfacing products, and termination components are available without a second visit to the supply house. See our brands for the full portfolio.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Chimney sweep | $189 – $350 |
| Dryer vent cleaning | $99 – $180 |
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $220 – $480 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $400 – $1,000 |
| Chimney liner installation | $2,500 – $5,000 |
| Firebox repair or resurfacing | $800 – $2,500 |
What pushes a quote higher in Mountain View is almost always access: a low-slope Eichler roof is harder to work on than a standard pitch, and some exterior flues in the older tracts are boxed in by neighboring walls. We give you a flat price before any work begins, so the quote you approve is the price you pay.
Neighborhoods We Serve in Mountain View
We work across all four Mountain View ZIP codes: 94040, 94041, 94042, and 94043. We’re usually in the area once or twice a week, which keeps response times short without adding a travel surcharge to the quote.
- Waverly Park
- Monta Loma
- Blossom Valley
- Cuesta Park
- Rex Manor
Service Area – Cities Near Mountain View
Chimney Sweep Berryessa also serves homeowners in the surrounding communities. If you’re in Los Altos, CA, Loyola, CA, Sunnyvale, CA, or Alviso, CA, the same crew and the same upfront pricing applies. Most of these cities share the same post-war housing stock and the same chimney profiles we see throughout Mountain View.
Serving Mountain View, CA – Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mountain View
We schedule Mountain View jobs in batches and are typically on site within five to seven business days of your call. Emergency repair situations – like a failed cap during a storm – get priority when we’re already in the area.
Some Eichler and tract developments have design review requirements for exterior changes, but caps and flashing repairs almost always qualify as maintenance and aren’t subject to review. We’ll flag it if your neighborhood has specific rules we’ve encountered before.
Yes, and in this housing market you should. The original factory-built fireboxes in 1950s and 60s homes often have issues a general home inspector won’t catch, and we give you a photo report you can take back to the seller.
If your chimney hasn’t been looked at in a year or more, or you’re planning a gas insert swap, call (877) 610-3049 for a free estimate. We’ll tell you what we find and fix what needs fixing.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Ruben Delgado"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Amit Shah"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Emily Mercer